www.idento.com document number: ttds-032 date: octobeter 2001 issue: 1 pages: 3 business locations: n america: + 1 650 361 3860 (west coast) germany: + 49 (0) 6074 89080 uk: + 44 (0) 1495 244000 (labels) japan: + 81 (0) 44 900 5102 n america: + 1 401 751 6505 (east coast) france: + 33 (0) 476 099696 uk: + 44 (0) 1793 528171 (other products) singapore: + 65 (0) 4866 151 all the above information, including illustra tions, is believed to be reliable. user s, however, should inde pendently evaluate the suitability of each product for their application. tyco electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liab ility regarding its use. tyco electronics only obligations are those in the standard terms and conditions of sale for this product and in no case will tyco electronics b e liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. tyco electronics specifications are subject to change without notice. in addition tyco electronics reserves the right to make changes in materials or processing, without notification to the buyer, which do not affe ct compliance with any applicable specification. technical data sheet raymark six labels material description: computer-printable zero halogen label material. permanent pressure sensitive acrylic adhesive. thermally stabilised wh ite polyester film with special ink receptive latent cure epoxy coating on t he label surface. after printing, the surface is heat cured, embedding the imag e within a tough polymeric layer. use: raymark six labels have outstanding abras ion and fluid resistance without the need for an overlay. ideal for applic ations where high performance variable data labels are needed, for example in defence, marine, rail and aerospace applications. can be used as a wire/cable wraparound marker for substrates not less than 6mm (0.25 inches) diameter. not recommended for outdoor use. print method/ribbon: dot matrix: tyco lq870, tyco tms-system-six-ribbon-a. curing conditions: 5 minutes at 150oc (302of) in an air ci rculating oven. small curing unit with automatic drive available (?permatizer?). curing also possible with hot air gun. contact tyco for details. shelf life/storage conditions: can be stored unopened for 12 months at temperatures not exceeding 35oc (95of). once opened, product should be stored below 25oc (77of) and 80% relative humidity and used within 6 months. service temperature: wiring marking: -40oc to +85oc (-40of to +185of) continuous. panel marking: -40oc to +105o (-40of to +221of) continuous. excursion temperature: 200oc (392of) for 2 hours. installation temp: +10 c to +40 c (+50 f to +104 f). colors: white.
www.idento.com document number: ttds-032 date: octobeter 2001 issue: 1 pages: 3 business locations: n america: + 1 650 361 3860 (west coast) germany: + 49 (0) 6074 89080 uk: + 44 (0) 1495 244000 (labels) japan: + 81 (0) 44 900 5102 n america: + 1 401 751 6505 (east coast) france: + 33 (0) 476 099696 uk: + 44 (0) 1793 528171 (other products) singapore: + 65 (0) 4866 151 all the above information, including illustra tions, is believed to be reliable. user s, however, should inde pendently evaluate the suitability of each product for their application. tyco electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liab ility regarding its use. tyco electronics only obligations are those in the standard terms and conditions of sale for this product and in no case will tyco electronics b e liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. tyco electronics specifications are subject to change without notice. in addition tyco electronics reserves the right to make changes in materials or processing, without notification to the buyer, which do not affe ct compliance with any applicable specification. raymark six labels performance: property test method result tensile strength astm d882 200n/25mm fungus resistance bs2011 part 2.1 jv1 rating 1 (max) weathering, carbon arc weatherometer 1500h, bs3900 f3 legible, <3 gray scale change, 15 n/25mm adhesion light fastness, xenon arc 250h, astm g26a legible, <3 gray scale change, 20 n/25mm adhesion continuous humidity 168h, 40oc (104of)/95% rh jedec 22a101-a legible, 15 n/25mm adhesion salt spray resistance 30days at 35oc (95o f), astm b117 legible, 15n/25mm adhesion thermal ageing 168h at 150oc (302of), iso 188 legible, 30n/25mm adhesion thermal cycling 10 cycles, -55oc (-67of) to 150oc (302of), mil-std-810 503.3 legible, 25n/25mm adhesion low temperature impact rtm 2592 no cracking dry abrasion resistance 500 cycles, 500g, cs10 wheel bs4781-1990 a7 legible toxicity index nes 713 2.8 smoke index nes 711 4 oxygen index nes 714 >29 installed adhesion to: stainless steel finat ftm1, 23oc 15 n/25mm stainless steel finat ftm1, 85oc 10 n/25mm aluminum finat ftm1, 23oc 20 n/25mm acrylic paint finat ftm1, 23oc 20 n/25mm abs finat ftm1, 23oc 20 n/25mm nylon finat ftm1, 23oc 15 n/25mm pvc finat ftm1, 23oc 15 n/25mm
www.idento.com document number: ttds-032 date: octobeter 2001 issue: 1 pages: 3 business locations: n america: + 1 650 361 3860 (west coast) germany: + 49 (0) 6074 89080 uk: + 44 (0) 1495 244000 (labels) japan: + 81 (0) 44 900 5102 n america: + 1 401 751 6505 (east coast) france: + 33 (0) 476 099696 uk: + 44 (0) 1793 528171 (other products) singapore: + 65 (0) 4866 151 all the above information, including illustra tions, is believed to be reliable. user s, however, should inde pendently evaluate the suitability of each product for their application. tyco electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liab ility regarding its use. tyco electronics only obligations are those in the standard terms and conditions of sale for this product and in no case will tyco electronics b e liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. tyco electronics specifications are subject to change without notice. in addition tyco electronics reserves the right to make changes in materials or processing, without notification to the buyer, which do not affe ct compliance with any applicable specification. raymark six labels print permanence: note: see tyco specification rw2029 for full performance & dimensional details. threat test method result white spirit /ipa mixture 23oc ( 73of) mil-std-202f 215f legible fluid splash resistance: brake fluid 23oc (73of) rw 2029 legible petrol 23oc (73of) rw 2029 legible fluid immersion (followed by peel test): methylated spirit 24h 23oc (73of) mil-m-81531 4.6.2 legible; min 15n/25mm adhesion isopropyl alcohol 24h 23oc (73of) mil-m- 81531 4.6.2 legible; min 15n/25mm adhesion petrol 24h 23oc (73of) mil-m-81531 4.6.2 legible; min 5n/25mm adhesion hydraulic fluid 28 days 50oc (122of) mil -m-81531 4.6.2 legible; min 15n/25mm adhesion lubricating oil 28 days 50oc (122of) mil -m-81531 4.6.2 legible; min 15n/25mm adhesion hydraulic fluid 24h 23oc (73of) mil-m-81531 4.6.2 legible; min 15n/25mm adhesion aviation fuel 24h 23oc (73of) mil-m- 81531 4.6.2 legible; min 15n/25mm adhesion diesel fuel 24h 23oc (73of) mil-m-815 31 4.6.2 legible; min 15n/25mm adhesion boiling water 2h mil-m-81531 4.6.2 legible; min 15n/25mm adhesion
|
